Colorize or blackout your climate control knobs. These easy to change out accents will give your 4Runner a pop of color or a blacked out look. They are customizable with small graphics.
*These single knobs will only work with the triple knob control setup. These WILL NOT work with the dual climate controls.
✔ 100% money-back guarantee. We are a small business and take pride in our work. We know a business is only successful if its customers are happy. While we are confident you will like our products, if for any reason you are unsatisfied with the product, we will work to make it right, including refunding your purchase.*
The knob accents are 3D printed. Due to the nature of 3D prints, there may be slight imperfections on surface areas. However, we provided you with parts that are as perfect as possible and consistently matched.
This product is not affiliated with Toyota or its brands.
Removing OEM Control Knobs
1. Grip and Pull: Hold the textured rubber band and pull straight out. Watch for the orange light bar, which may come loose.
2. Remove Knob Cover: Push from the inside to detach the cover. For knobs with a push button, remove similarly.
Installing New Covers (Solid & Push Button) If you ordered the whole knobs skip to step 3.
1. Position the Base: Ensure tabs on the base are facing up and the light bar (on three-knob setups) posts are correctly oriented. Be very careful with the tabs, they are brittle until the knob is installed. Do not force anything.
2. Attach the Accent: Press the new accent piece firmly onto the base.
3. Install the Light Bar: If you have the three-knob setup, place the light bar between the long posts, curved corner facing up. Slide down until it aligns with the top of the cover. If you mixed up the bars, the middle one is slightly wider and will not fit the end knobs. Forcing it in could break the accent.
4. Reattach the Knob: Push the knob onto the control, ensuring the posts/tabs align. Apply firm pressure until it snaps in securely.
Installing the Push Button
1. Orientation: Install the push button with the light and text facing up. The small ridge on the button must fit into a groove at the top.
2. Installation: Gently wiggle while pressing down to slide it into place.
